 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STD2805 Low voltage fast-switching PNP power transistor Preliminary Data Features Very low collector to emitter saturation voltage High current gain characteristic Fast-switching speed Surface-mounting DPAK (TO-252) power package in tape & reel (suffix "T4) Through-hole IPAK (TO-251) power package in tube (suffix "-1") 3 1 TO-252 DPAK (suffix "T4") TO-251 IPAK (suffix "-1") 1 2 3 Description The device is manufactured in PNP Planar technology by using a "Base Island" layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. Figure 1. Internal schematic diagram Applications CCFL drivers Voltage regulators Relay drivers High efficiency low voltage switching applications Table 1. Devices summary Marking D2805 D2805 Package DPAK IPAK Packaging Tape & reel Tube Order codes STD2805T4 STD2805-1 June 2007 Rev 1 1/9 www.st.com 9 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. Electrical ratings STD2805 1 Electrical ratings Table 1. Symbol VCBO VCEO VEBO IC ICM IB Ptot Tstg TJ Absolute maximum rating Parameter Collector-base voltage (IE =0) Collector-emitter voltage (IB =0) Emitter-base voltage (IC =0) Collector current Collector peak current (tP < 5ms) Base current Total dissipation at T c 25C Storage temperature Max. operating junction temperature Value -60 -60 -6 -5 -10 -2 15 -65 to 150 150 Unit V V V A A A W C C Table 2. Symbol Rthj-case Thermal data Parameter Thermal resistance junction-case __max Value 8.33 Unit C/W 2/9 STD2805 Electrical characteristics 2 Electrical characteristics (Tcase = 25C unless otherwise specified) Table 3. Symbol ICBO IEBO Electrical characteristics Parameter Collector cut-off current (IE =0) Emitter cut-off current (IC =0) Collector-base breakdown voltage (IE = 0) Collector-emitter breakdown voltage (IB = 0) Emitter-base breakdown voltage (IC = 0) Test Conditions VCB = -60V VEB = -5V Min. Typ. Max. 0.1 0.1 Unit A A V(BR)CBO IC =-100A -60 V V(BR)CEO IC =-1mA -60 V V(BR)EBO IE =-100A IC =-100mA _ IB =-5mA -6 -50 -150 -200 -300 -400 -600 -0.9 200 85 20 150 60 -1.2 400 V mV mV mV mV V VCE(sat) (1) Collector-emitter saturation voltage IC =-2A IC =-3A IC =-5A _ _ IB =-50mA ___ IB =-150mA ___ IB =-200mA _ _ IB =-50mA VCE =-2V VCE =-2V VCE =-2V IC =-50mA f =1MHz IC = -1A VBE(sat) (1) Base-emitter saturation voltage IC =-2A IC =-100mA hFE fT CCBO (1) DC current gain IC =-5A IC =-10A VCE =-10V VCB =-10V VCC = -30V Transition frequency Collector-base capacitance Resistive load Turn-on time Storage time Fall time MHz pF tON ts tf IB1 =-IB2 = -0.1A 80 600 70 ns ns ns Note (1) Pulsed duration = 300 s, duty cycle 1.5% 3/9 Electrical characteristics STD2805 2.1 Test circuit Figure 2. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 4/9 STD2805 Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 5/9 Package mechanical data STD2805 TO-252 (DPAK) MECHANICAL DATA DIM. MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0o 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8o 0.024 0o mm TYP. MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0o inch TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398 P032P_B 6/9 STD2805 Package mechanical data TO-251 (IPAK) MECHANICAL DATA DIM. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 V1 0.45 0.48 6.00 6.40 4.40 15.90 9.00 0.80 0.80 10o 0.30 0.95 0.60 0.60 6.20 6.60 4.60 16.30 9.40 1.20 1.00 0.018 0.019 0.237 0.252 0.173 0.626 0.354 0.031 0.031 10o mm MIN. 2.20 0.90 0.70 0.64 5.20 TYP. MAX. 2.40 1.10 1.30 0.90 5.40 0.85 0.012 0.037 0.024 0.024 0.244 0.260 0.181 0.642 0.370 0.047 0.039 MIN. 0.087 0.035 0.028 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.035 0.213 0.033 P032N_E 7/9 Revision history STD2805 4 Revision history Table 4. Date 26-Jun-2007 Revision history Revision 1 Initial release. Changes 8/9 STD2805 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of Americawww.st.com www.st.com 9/9 |
Price & Availability of STD2805
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |